How to Reset LED Strip

how to reset led strip

Lights are very useful when it has to do with decorating a room or a relaxation point in a house or anywhere else. One of the most commonly used lights is LED strip lights.

They have unique light bulbs with different colors that give the decoration a whole unique touch.

However, these modern lights come in various forms like direct connect light strips, LED strip WiFi lights, etc., and due to these designs, the lights may experience some challenges that would require a total reset.

Therefore, understanding how to reset LED strip lights would be necessary at this point so that you can easily overcome such a challenge whenever the need arises.

What are LED Strips and How do they Work?

LED strips are unique lights that contain tiny lights that illuminate simultaneously to create a string of lights within the location where it is installed.

The lights are often used in decorating rooms and other interior areas of a house. They can also be used for the exterior.

There are various LED strip lights fitted with several functionalities. Some are Bluetooth light strips, WiFi light strips, etc. The lights are designed in grades, and their prices vary with respect to the qualities.

LED strip lights are fitted with a remote control device that enables the user to control its function, especially when a factory reset is required.

The reset enables the user to start using the lights afresh in just one shot.

The lights are durable, as they can be used over a long period without a replacement.

However, they must be installed appropriately to work well, and if the need arises to remove them, they must be carefully removed to retain their potency.

How to Reset LED Strips

LED strip lights come with a remote controller that helps the user switch its function and perform a reset.

In that case, it is important to get acquainted with the use of the LED light remote because of the built-in reset button and other functions that it serves.

To successfully reset LED strip lights, engage the following steps one after the other as prescribed below.

Step 1: Plug the LED strip and turn it on

First and foremost, plug the LED strip light in its place and turn it on.

Allow it to stay on for a few seconds. Ensure that the LED strip lights circuit is without any encumbrances.

Also, ensure that the power supply voltage and current flow are compatible with the LED lights to avoid complications.

Step 2: Turn it off and remove the adapter

After allowing the lights on for a few seconds, turn it off. After that, remove the power adapter.

Meanwhile, ensure not to turn off the remote. The remote will be helpful throughout the process, so keep it on all through the reset process.

Step 3: Press the power button and hold

Now, press the power button (usually a red button) on the remote and hold it for some time (say 5 to 7 seconds).

Then get the power supply connected again.

Step 4: Press and hold the button some more

After reconnecting the power supply, press the power button and hold it on for a few seconds (5 to 6 seconds). Then, allow the LED strips to turn on.

Once the lights turn on, they will alternate light colors; from red to green to blue and yellow.

Once the lights turn yellow, you can then release the power button. With this brief procedure, the LED strip lights factory reset will be carried out successfully.

After a successful reset, you can start using the LED strip lights afresh while enjoying their longevity because they can last for more years. However, ensure to keep them under perfect working conditions.

How do you troubleshoot LED Strip Lights?

LED strip lights may turn off suddenly without showing any sign of faults before that time. In that case, you will need to troubleshoot any perceived issue that may be responsible. To do that, try out the following.

  • Examine the power supply voltage and the available current rating to ascertain whether they are compatible with the LED strip lights.
  • Confirm whether the power supply is faulty or working correctly.
  • Observe the circuit to ascertain whether unnecessary accessories are affecting the LED strip lights from working well. If any, try to isolate them.
  • Examine the connections to know whether there are any loose connections. If you find a loose connection, endeavor to rectify it.

Having observed any possible challenges, go ahead and fix them, then test the LED strip light to see whether it will work.

FAQs

Can you unstuck LED Strip Lights?

Of course, you can unstuck LED strip lights when the need arises. LED strip lights are designed in an adhesive and semi-permanent way, which makes it pretty easy to unstuck them whenever you need to do so. Since you can easily unstuck them, if you have a blown LED strip bulb, just go ahead and remove the bulb and replace it. The fact that the LED strip lights are not permanent makes both repair and replacement easy.

Can you remove LED strip lights and reuse them?

Yes, you can reuse LED strip lights after removing them for a while. LED strip lights are durable; hence, they do not go bad immediately after they are removed. So, you can still reuse LED strip lights after removing them for any reason, provided they are still working. If you discover that the LED strip light’s adhesive at the back is faulty, you can replace it and reuse the lights for another decoration. This will go a long way to save you the financial stress of getting another LED strip light.

How long do LED Strip Lights last?

LED strip lights are durable, as they have a longer lifespan than what most people would expect. LED strip lights last an average lifespan of about 50,000 hours or thereabout. This is quite far more compared to the lifespan of fluorescent and incandescent lights. That means LED strip lights can still shine bright even after 17 years, making them one of the long-lasting lights among their counterparts. However, you must ensure that the LED strip lights are not exposed to any conditions that can affect their lifespan within a short time.

Why is my LED strip not working?

One of the primary reasons an LED light may not work is a bad, faulty, or incorrect pin connection. The pins are designed to fuse into their ports when connected to enable the light to illuminate when necessary. If an LED strip light refuses to turn on, it is most likely that the pin is not connecting with the ports correctly. It is pretty rare to find out that an LED strip light’s pin is totally faulty or bad. In most cases, they are wrongly connected. So, if you find out that your LED strip lights won’t turn on, kindly disconnect the pin from their ports and reconnect appropriately, with each pin fusing into its port tightly.

Final Thoughts

Undoubtedly, LED strip lights are very useful for decorative purposes, as they give a room or any interior setting a whole new look.

However, a user who lacks how the LED strip lights work may be frustrated when there is a need to reset the lights. That is why the information in this article is essential, as a step-by-step procedure has been unveiled on how to reset LED strip lights.

If you have an issue with the LED strip lights in your room, hotel, or other parts of your house, why not try a factory reset? Resetting the lights can help you address the issue.

Meanwhile, if the bulbs are bad, all you need to do is replace them, and the lights will be up again, working perfectly well.

author avatar
Sayeed Parvez

Trending